45° angle joint
The angle connector is a component used to create angle joints. It allows for connection at a 45° angle without the need for angle cutting. The connector is mounted on one side into the groove of the structural profile using a bolt and nut, and on the other side using a bolt inserted into the threaded profile. The connector has positioning tabs in the groove on both sides, which prevent the component from twisting when tightened with a single bolt.
Tools and components for assembly
| Module |
Tools required |
Assembly components |
|||
|---|---|---|---|---|---|
|
Number |
Bolt |
Bolt + Nut |
Quantity |
||
| M20 R5 |
M5 tap, Allen key |
302020 | 200512 | 200508 + 211252 | 1 / 1 + 1 |
| 304045 | 200512 | 200508 + 211252 | 1 / 2 + 2 | ||
| M30 R8 D5.5 |
M6 tap, Allen key |
303045 | 200625 | 200612.2 + 210036/210609 | 1 / 1 + 1 |
| 306045 | 200625 | 200612.2 + 210036/210609 | 1 / 1 + 1 | ||
| M30 R8 D7.3 |
M8 tap, Allen key |
303045 | 200825 | 200812 + 210809 | 1 / 2 + 2 |
| 306045 | 200825 | 200812 + 210809 | 1 / 2 + 2 | ||
| M40 R8 | M8 tap, Allen key | 304046 | 200825 | 200816 + 210482 | 1 / 1 + 1 |
| 308045 | 200825 | 200816 + 210482 | 1 / 2 + 2 | ||
| M40-I R8 | M8 tap, Allen key | 304046 | 200825 | 200816 + 210482/210208 | 1 / 1 + 1 |
| 308045 | 200825 | 200816 + 210482/210208 | 1 / 2 + 2 | ||
| M45 R10 | M12 tap, Allen key | 304546 | 201230.8 | 200820 +215008.4+ 210080/210082 | 1 / 1 + 1 |
| 309045 | 201230.8 | 200820 +215008.4+ 210080/210082 | 1 / 2 + 2 | ||
